Inicio > Matemáticas y ciencia > Física > Termodinámica y calor > Heavy Metal Ion Adsorption by Coconut Shell Activated Carbon
Heavy Metal Ion Adsorption by Coconut Shell Activated Carbon

Heavy Metal Ion Adsorption by Coconut Shell Activated Carbon

Deepak Kumar Dawar

34,49 €
IVA incluido
Consulta disponibilidad
Editorial:
Draft2Digital
Año de edición:
2024
Materia
Termodinámica y calor
ISBN:
9798224167364

Selecciona una librería:

  • Librería Perelló (Valencia)
  • Librería Aciertas (Toledo)
  • El AlmaZen del Alquimista (Sevilla)
  • Librería Elías (Asturias)
  • Librería Kolima (Madrid)
  • Donde los libros
  • Librería Proteo (Málaga)

Adsorption is a process that occurs when a gas or liquid solute accumulates on the surface of a solid or a liquid (adsorbent), forming a molecular or atomic film (the adsorbate). Adsorption is operative in most natural physical, biological and chemical system and is widely used in industrial application such as activated charcoal, synthetic resins and water purification. Among these methods, adsorption is currently considered to be very suitable for waste water treatment because of its simplicity and cost effectiveness.Adsorption is commonly used technique for the removal of metal ions from various industrial effluents. It is a physicochemical process in which dissolved molecules are attached to the surface of an adsorbent by physical or chemical forces. The substance which adsorbs another substance on its surface is called as adsorbent while the substance which itself get adsorbed on the surface of another substance is called adsorbate. All adsorption performance processes are depends on solid-liquid equilibria and on mass transfer rates. If the mass transfer is in opposite direction then it is called as Desorption.Most adsorbents are highly porous materials, and adsorption takes place primarily on the walls of the pores or at the specific sites inside the particle. An adsorbent material must have a high internal volume, which is accessible to the components being removed from the solvent. Surface area and the distribution of area with respect to pore size are two very important factors in determining extent of adsorption. The overall rate of adsorption is controlled by the rate of diffusion of solute within the capillary pores of the adsorbent and varies with square root of the contact time with the adsorbent.

Artículos relacionados

  • Effet des carburants mélangés diesel/biodiesel sur les performances d’un moteur à allumage commandé
    Ashok Kumar Yadav
    Un moteur diesel monocylindre à quatre temps (Kirloskar) a été testé à pleine charge avec le carburant mélangé à la vitesse nominale de 1500 tr/min. Le MOME, le MOEE et le WCME ont été mélangés au diesel dans des proportions de 5 %, 10 %, 15 % et 20 %, en volume, et du diesel pur a été utilisé comme carburant. Les performances du moteur (consommation spécifique de carburant, re...
    Disponible

    70,04 €

  • Auswirkung von Diesel/Biodiesel-Mischkraftstoffen auf die Leistung von C.I.-Motoren
    Ashok Kumar Yadav
    Ein Einzylinder-Viertakt-Dieselmotor (Kirloskar) wurde unter Volllast mit dem gemischten Kraftstoff bei einer Nenndrehzahl von 1500 U/min getestet. Als Kraftstoff wurden MOME, MOEE und WCME in Anteilen von 5, 10, 15 und 20 Volumenprozent mit Diesel und reinem Diesel gemischt. Die Motorleistung (spezifischer Kraftstoffverbrauch, thermischer Bremswirkungsgrad und Bremsleistung) u...
    Disponible

    70,04 €

  • Effetto delle miscele diesel/biodiesel sulle prestazioni dei motori ad accensione spontanea
    Ashok Kumar Yadav
    Un motore diesel monocilindrico a quattro tempi (Kirloskar) è stato testato a pieno carico con il carburante miscelato alla velocità nominale di 1500 giri/min. Come carburante sono stati utilizzati MOME, MOEE e WCME miscelati al diesel in proporzioni del 5%, 10%, 15% e 20% in volume e diesel puro. Le prestazioni del motore (consumo specifico di carburante, efficienza termica al...
    Disponible

    69,97 €

  • Efeito da Mistura de Combustíveis Diesel/Biodiesel no Desempenho do Motor C.I.
    Ashok Kumar Yadav
    Um motor diesel monocilíndrico a quatro tempos (Kirloskar) foi testado a plena carga com o combustível misturado à velocidade nominal de 1500 rpm. Foram utilizados como combustível MOME, MOEE e WCME misturados com gasóleo em proporções de 5%, 10%, 15% e 20%, em volume, e gasóleo puro. O desempenho do motor (consumo específico de combustível, eficiência térmica de travagem e pot...
    Disponible

    70,04 €

  • Влияние смеси дизельного и биодизельного топлива на производительность двигателя C.I.
    Ашок Кумар Ядав
    Одноцилиндровый четырехтактный дизельный двигатель (Kirloskar) был испытан при полной нагрузке с использованием смешанного топлива на номинальной скорости 1500 об/мин. В качестве топлива использовались смеси MOME, MOEE и WCME с дизельным топливом в пропорциях 5%, 10%, 15% и 20% по объему и чистое дизельное топливо. Для оценки и расчета поведения дизельного двигателя, работающег...
    Disponible

    70,17 €

  • Сверхкритическая газификация воды для производства водорода
    Даниэль Мантовани / Кардозо Филь / Леанд Феррейра Пинто
    Производство энергии в виде водорода из промышленных, сельских и городских отходов является концепцией устойчивой технологии, поскольку эти отходы не приносят экономической выгоды и оцениваются как экологическое препятствие. Использование водорода в качестве вектора энергии, произведенного из остатков биомассы, может быть оценено как интересная форма хранения энергии. Водород м...
    Disponible

    69,66 €